Getting Started
R&S
®
FSW
98
User Manual 1173.9411.02 ─ 43
2. After entering the numeric value via keypad, press the corresponding unit key.
The unit is added to the entry.
3. If the parameter does not require a unit, confirm the entered value by pressing the
[ENTER] key or any of the unit keys.
The editing line is highlighted to confirm the entry.
5.4.4.2
Entering Alphanumeric Parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to enter
numbers and (special) characters (see
Chapter 5.4.2.4, "On-screen Keyboard"
Alternatively, you can use the keypad. Every alphanumeric key represents several
characters and one number. The decimal point key (.) represents special characters,
and the sign key (-) toggles between capital and small letters. For the assignment,
refer to
.
You can change the default behavior of the keypad for text input. This is useful if you
frequently enter numeric values in text fields, for example to define file names consist-
ing of numbers.
For details, see
To enter numbers and (special) characters via the keypad
1. Press the key once to enter the first possible value.
2. All characters available via this key are displayed.
3. To choose another value provided by this key, press the key again, until your
desired value is displayed.
4. With every key stroke, the next possible value of this key is displayed. If all possi-
ble values have been displayed, the series starts with the first value again. For
information on the series, refer to
5. To change from capital to small letters and vice versa, press the sign key (-).
6. When you have chosen the desired value, wait for 2 seconds (to use the same key
again), or start the next entry by pressing another key.
To enter a blank
► Press the "Space" bar, or press the "0" key and wait 2 seconds.
To correct an entry
1. Using the arrow keys, move the cursor to the right of the entry you want to delete.
2. Press the [BACKSPACE] key.
The entry to the left of the cursor is deleted.
Operating the Instrument
