R&S FSW Series, User Manual, Page: 973 / 1450

Remote Commands
R&S
®
FSW
973 User Manual 1173.9411.02 ─ 43
Parameters:
<RefLevel> The unit is variable.
If a reference level offset is included, the range is adjusted by
that offset.
Range:
-130 dBm to 30 dBm
*RST: 0 dBm
Default unit: dBm
Example: CALC:STAT:SCAL:X:RLEV -60dBm
Manual operation: See "Ref Level" on page 302
CALCulate<n>:STATistics:SCALe:Y:LOWer <Magnitude>
This command defines the lower vertical limit of the diagram.
Suffix:
<n>
.
Window
Parameters:
<Magnitude> The number is a statistical value and therefore dimensionless.
Range:
1E-9 to 0.1
*RST: 1E-6
Example: CALC:STAT:SCAL:Y:LOW 0.001
Manual operation: See "Y-Max/ Y-Min" on page 302
CALCulate<n>:STATistics:SCALe:Y:UNIT <Unit>
This command selects the unit of the y-axis.
Suffix:
<n>
.
Window
Parameters:
<Unit> PCT | ABS
*RST:
ABS
Example: CALC:STAT:SCAL:Y:UNIT PCT
Sets the percentage scale.
Manual operation: See "Y-Unit" on page 302
CALCulate<n>:STATistics:SCALe:Y:UPPer <Magnitude>
This command defines the upper vertical limit of the diagram.
Suffix:
<n>
.
Window
Configuring and Performing Measurements