Getting Started
R&S
®
FSW
97
User Manual 1173.9411.02 ─ 43
a blue frame (diagram, window, table) or is otherwise highlighted (softkey, marker etc.).
Moving the focus is most easily done by tapping on the element on the touchscreen.
Alternatively, use the "Tab" key on the on-screen keyboard or the rotary knob to move
the focus from one element to the next on the display.
To move the focus between any displayed diagrams or tables in a window, press the
"Change focus" key on the front panel. The focus moves from the diagram to the first
table to the next table etc. and then back to the diagram, within the same window.
In fullscreen mode, where a single window is displayed in full size on the screen, this
key switches the focus (and the display) from one active window to the next.
5.4.4
Entering Data
You can enter data in dialog boxes using any of the following methods:
●
Using the touchscreen, via the on-screen keyboard
●
Using other elements provided by the front panel, e.g. the keypad, rotary knob, or
navigation keys
The rotary knob acts like the [ENTER] key when it is pressed.
●
Using a connected external keyboard
Transparent dialog boxes
You can change the transparency of the dialog boxes to see the results in the windows
behind the dialog box. Thus, you can see the effects that the changes you make to the
settings have on the results immediately.
To change the transparency, select the transparency icon at the top of the dialog box.
A slider is displayed. To hide the slider, select the transparency icon again.
(The title bar of the dialog box is always slightly transparent and is not affected by the
slider.)
Particularities in Windows dialog boxes
In some cases, e.g. if you want to install a printer, original Windows dialog boxes are
used. In these dialog boxes, the rotary knob and function keys do not work. Use the
touchscreen instead.
5.4.4.1
Entering Numeric Parameters
If a field requires numeric input, the keypad provides only numbers.
1. Enter the parameter value using the keypad, or change the currently used parame-
ter value by using the rotary knob (small steps) or the [UP] or [DOWN] keys (large
steps).
Operating the Instrument
