R&S FSW Series, User Manual, Page: 930 / 1450

Remote Commands
R&S
®
FSW
930 User Manual 1173.9411.02 ─ 43
MAX
The maximum of the relative and the absolute level is used as
the limit start value. Use the
[SENSe:]ESPectrum<sb>:
RANGe<ri>:LIMit<li>:RELative:STARt
and
[SENSe:
]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:
STARt:ABS
commands to define these values.
OFF
No function is used, the relative limit line is defined by a fixed
relative start value. Use the
[SENSe:]ESPectrum<sb>:
RANGe<ri>:LIMit<li>:RELative:STARt
command to
define this value.
*RST:
OFF
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STARt:
FUNCtion MAX
For a detailed example see Chapter 14.5.7.11, "Example: SEM
Measurement" , on page 950.
Manual operation: See "Rel Limit Start / Stop <n>" on page 254
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP <Level>
This command defines a relative limit for a SEM range.
Unlike manual operation, you can define a relative limit anytime and regardless of the
limit check mode.
Suffix:
<sb>
.
1 to 8
Sub block in a Multi-SEM measurement
<ri> 1..n
Selects the SEM range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Relative limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST: -50
Default unit: dBc
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STOP -15
For a detailed example see Chapter 14.5.7.11, "Example: SEM
Measurement" , on page 950.
Manual operation: See "Rel Limit Start / Stop <n>" on page 254
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP:ABS <Level>
This command defines an absolute limit for the MAX function of the relative limit for a
SEM range.
Configuring and Performing Measurements