Remote Commands
R&S
®
FSW
849
User Manual 1173.9411.02 ─ 43
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Alpha>
Roll-off factor
Range:
0 to 1
*RST:
0.22
Manual operation:
See
See
[SENSe:]POWer:ACHannel:FILTer:ALPHa:CHANnel<ch>
<Alpha>
This command defines the roll-off factor for the transmission channel weighting filter.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Alpha>
Roll-off factor
Range:
0 to 1
*RST:
0.22
Manual operation:
See
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel
<State>
This command turns the weighting filter for the adjacent channel on and off.
For asymmetrical MSR signals, this command turns the weighting filter for the lower
adjacent channel on and off. To configure the filter state for the upper adjacent chan-
nel, use the
[SENSe:]POWer:ACHannel:FILTer[:STATe]:UACHannel
mand.
Parameters:
<State>
ON | OFF | 1 | 0
*RST:
0
Manual operation:
See
See
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL]
<State>
This command turns the weighting filters for all channels on and off.
Parameters:
<State>
ON | OFF | 1 | 0
*RST:
0
Configuring and Performing Measurements
