R&S FSW Series, User Manual

Page: 301 / 1450

Measurements and Results
R&S
®
FSW
301 User Manual 1173.9411.02 ─ 43
Note: You can define the time values with a greater numerical resolution than is dis-
played; the values are only rounded for display.
Remote command:
[SENSe:]SWEep:EGATe:TRACe<t>:STARt<gr>
on page 970
[SENSe:]SWEep:EGATe:TRACe<t>:STOP<gr>
on page 970
7.8.5.3 Scaling for Statistics Diagrams
Access : "Overview" > "Amplitude" > "Scale" tab
Or : [AMPT] > "Scale Config"
For statistics displays, scale settings are available for both the y-axis and the x-axis.
The remote commands required to perform these tasks are described in Chap-
ter 14.5.9.4, "Scaling the Diagram" , on page 971.
Figure 7-49: Scale settings for CCDF diagram
In statistical diagrams, the x-axis displays the signal level values (= y-axis in standard
display), while the y-axis displays the probability of the values.
X-Axis ..........................................................................................................................302
└ Ref Level .......................................................................................................302
└ Range ........................................................................................................... 302
└ Shifting the Display (Offset) .......................................................................... 302
Y-Axis .......................................................................................................................... 302
└ Y-Unit ............................................................................................................ 302
└ Y-Max/ Y-Min .................................................................................................302
Default Settings ...........................................................................................................302
Adjust Settings ............................................................................................................ 303
Statistical Measurements (APD, CCDF)