Remote Commands
R&S
®
FSW
1370
User Manual 1173.9411.02 ─ 43
Table 14-11: Supported PXA commands for Analog Demodulation
CONFigure:AM
CONFigure:AM:NDEFault
DISPlay:AM:WINDow:TRACe:Y[:SCALe]:RLEVel
<
real
>
READ:AM?
FETCh:AM?
[SENSe]:AM:DWSWeep:TIME
<
real
>
14.13.6
Command Set for Vector Signal Analysis (VSA) for Emulated
R&S
FSE Instruments
The R&S
FSW supports a subset of the GPIB commands of the R&S
FSE for vector
signal analysis (VSA).
Despite the differences in system architecture and device features, the supported com-
mands have been implemented in a way to ensure a sufficiently high degree of corre-
spondence with the original.
In many cases the selection of commands supported by the R&S
FSW is sufficient to
run an existing GPIB program without adaptation.
Table 14-12: Supported R&S
FSE commands for vector signal analysis (VSA)
CALCulate{1|2}:MARKer{m}:FUNCtion:DDEMod:RESult?
CALCulate{1|2}:TLINe{1|2}
<
real
>
CALCulate{1|2}:TLINe{1|2}:STATe
<
bool
>
[SENSe]:DDEMod:SEARch:SYNC:OFFSet
<
real
>
[SENSe]:DDEMod:SEARch:SYNC:PATTern
<
pattern
>
[SENSe]:DDEMod:SEARch:PULSe:STATe
<
bool
>
[SENSe]:DDEMod:SEARch:TIME
<
real
>
[SENSe]:DDEMod:FILTer:REFerence
[SENSe]:DDEMod:PRESet[:STANdard]
[SENSe]:TCAPture:LENGth
<
real
>
TRIGger[:SEQuence]:LEVel:VIDeo
<
real
>
14.14
Deprecated Commands
The following commands are provided for compatibility to other signal analyzers only.
For new remote control programs use the specified alternative commands.
Deprecated Commands
