Remote Commands for Bluetooth Measurements (K8)
R&S
®
FSV-K8
69
Operating Manual 1176.7610.02 ─ 02
Return values:
<Result>
<TX channel – n>...<TX channel – 1> <TX channel> <TX chan-
nel + 1>...<TX c n>
The results are returned as a list of power values.
The number of adjacent channels is limited by the Bluetooth
band limits.
Example:
INST:SEL BTO
Activates the Bluetooth Measurements option.
INIT:CONT OFF
Selects single sweep operation.
CONF:BTO:MEAS ACLR
Activates the Adjacent Channel Power measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:ACLR?
Queries the power list.
Usage:
Query only
Mode:
BT
Manual operation:
See
CALCulate<n>:BTOoth:ACLR:EXCeptions?
This command determines the number of exceptions which occurred during the adja-
cent channel power measurement according to the Bluetooth specification.
Note:
This command is only available with active Adjacent Channel Power measurement
(see
on page 96). With all other measure-
ments this command causes a query error.
Suffix:
<n>
.
irrelevant
Example:
INST:SEL BTO
Activates the Bluetooth Measurements option.
INIT:CONT OFF
Selects single sweep operation.
CONF:BTO:MEAS ACLR
Activates the Adjacent Channel Power measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:ACLR?
Queries the power list.
CALC:BTO:ACLR:EXC?
Queries the number of exceptions.
Usage:
Query only
Mode:
BT
CALCulate subsystem
