Instrument Functions for Bluetooth Measurements (K8)
R&S
®
FSV-K8
47
Operating Manual 1176.7610.02 ─ 02
The measurement of the adjacent channels is limited to the available Bluetooth fre-
quency band, which means that at maximum 79 channels (23 channels in France) will
be measured.
Remote command:
Gate Delay (Spurious Emissions) ← Spurious Emissions
Opens an edit dialog box to enter the time between trigger event and start of the DPSK
packet. That is the measurement start time.
Remote command:
Gate Length (Spurious Emissions) ← Spurious Emissions
Opens an edit dialog box to enter the sweep time in seconds. Usually, this is the length
of the DPSK section.
Remote command:
Adjust Gate ← Spurious Emissions
Adjusts the gate settings according to the pre–measurement results.
Remote command:
Carr Freq Stability
Opens a submenu to configure the Carr Freq Stability measurement. For further details
refer to
chapter 3.1.8, "Carrier Frequency Stability and Modulation Accuracy (EDR)
Remote command:
CONF:BTO:MEAS CFST
, see
Channel ← Carr Freq Stability
Opens an edit dialog box to enter the transmission channel number. From the number
of the channel the center frequency is calculated in accordance to the RF Test Specifi-
cation. The default setting is channel number 0.
Softkeys of the Bluetooth Menu
