R&S FSV-K7, Operating Manual, Page: 96 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
96 Operating Manual 1176.7561.02 ─ 06
Note that you should perform a complete measurement with synchronization to the end
of the measurement. This is only possible for single sweeps.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Parameters:
<Range> <numeric_value>
Example: INIT:CONT OFF
Switches to single sweep mode
CALC:MARK:FUNC:ZOOM 1kHz;*WAI
Activates zooming and waits for its end.
Manual operation: See "Marker Zoom (span > 0)" on page 71
CALCulate<n>:MARKer<m>:LINK <DisplayType>
Links the markers in all displays of the specified type.
Suffix:
<n>
.
1...4
window
<m> 1...16
marker
Parameters:
<DisplayType> TIME | SPECtrum | BOTH | NONE
TIME
Links the markers in all time domain diagrams
SPECtrum
Links the markers in all AF Spectrum displays
BOTH
Links the markers both in the time domain diagrams and in the
AF Spectrum displays
NONE
Markers are not linked.
*RST:
NONE
Example: CALC1:MARK1:LINK TIME
Links the marker 1 in all time domain diagrams in screen A.
Mode: ADEMOD
Manual operation: See "Link Time Marker" on page 71
See "Link AF Spectrum Marker" on page 71
CALCulate<n>:THReshold <Threshold>
This command defines a threshold value for the marker peak search.
Remote Commands of the Analog Demodulation (R&S FSV–K7)