R&S FSV-K7, Operating Manual, Page: 247 / 262

FM Stereo Option R&S FSV–K7S
R&S
®
FSV-K7/K7S
247 Operating Manual 1176.7561.02 ─ 06
TRIGger<n>[:SEQuence]:LEVel:SFM:STEReo <Level>
The command sets the level when the stereo channel is used as trigger source.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Level> Range: -10 to +10
*RST: 0 Hz
Default unit: MHz
Example: TRIG:LEV:SFM:STER 2Hz
Sets the trigger threshold of the stereo signal to 2 Hz.
Mode: SFM
Manual operation: See "Stereo" on page 218
TRIGger<n>[:SEQuence]:LEVel:SFM:RDS <Level>
The command sets the level when the RDS stereo channel is used as trigger source.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Level> Range: -10 to +10
*RST: 0 Hz
Default unit: MHz
Example: TRIG:LEV:SFM:RDS 2Hz
Sets the trigger threshold of the RDS stereo signal to 2 Hz.
Mode: SFM
Manual operation: See "RDS" on page 218
TRIGger<n>[:SEQuence]:LEVel:SFM:PILot <Level>
The command sets the level when the pilot stereo channel is used as trigger source.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Level> Range: -10 to +10
*RST: 0 Hz
Default unit: MHz
Example: TRIG:LEV:SFM:PIL 2Hz
Sets the trigger threshold of the pilot stereo signal to 2 Hz.
Remote Commands of the FM Stereo Option (R&S FSV–K7S)