Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
178
Operating Manual 1176.7561.02 ─ 06
INPut:COUPling
<CouplingType>
Toggles the RF input of the R&S
FSVA/FSV between AC and DC coupling.
This function is not available if the R&S Digital I/Q Interface (R&S
FSV-B17) is active.
Parameters:
<CouplingType>
AC | DC
*RST:
AC
Example:
INP:COUP DC
Manual operation:
See
INPut:DIQ:CDEVice
This command queries the current configuration and the status of the digital baseband
input from the optional R&S Digital I/Q Interface (option R&S
FSV-B17).
For details see the section "Interface Status Information" for the R&S Digital I/Q Inter-
face (R&S
FSV-B17) in the description of the base unit.
Return values:
<ConnState>
Defines whether a device is connected or not.
0
No device is connected.
1
A device is connected.
<DeviceName>
Device ID of the connected device
<SerialNumber>
Serial number of the connected device
<PortName>
Port name used by the connected device
<SampleRate>
Maximum or currently used sampling rate of the connected
device in Hz (depends on the used connection protocol version;
indicated by <SampleRateType> parameter)
<MaxTransferRate> Maximum data transfer rate of the connected device in Hz
<ConnProtState>
State of the connection protocol which is used to identify the
connected device.
Not Started
Has to be Started
Started
Passed
Failed
Done
<PRBSTestState>
State of the PRBS test.
Not Started
Has to be Started
Remote Commands of the Analog Demodulation (R&S
FSV–K7)
