Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
173
Operating Manual 1176.7561.02 ─ 06
Suffix:
<n>
.
Selects the measurement window.
<m>
irrelevant
Note
: marker 2 is always the deltamarker for phase noise mea-
surement results.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:DELT:FUNC:PNO ON
Switches on the phase-noise measurement with all delta mark-
ers.
CALC:DELT:FUNC:FIX:RPO:X 128 MHZ
Sets the frequency reference to 128 MHz.
CALC:DELT:FUNC:FIX:RPO:Y 30 DBM
Sets the reference level to +30 dBm
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:AUTO
<State>
This command turns an automatic peak search for the fixed reference marker at the
end of a sweep on and off.
Suffix:
<n>
.
Selects the measurement window.
<m>
irrelevant
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:DELT:FUNC:PNO:AUTO ON
Activates an automatic peak search for the reference marker in
a phase-noise measurement.
CALCulate<n>:DELTamarker<m>:LINK
<State>
This command links delta marker 1 to marker 1.
If you change the horizontal position of the marker, so does the delta marker.
Suffix:
<n>
.
Selects the measurement window.
<m>
1
irrelevant
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:DELT:LINK ON
Remote Commands of the Analog Demodulation (R&S
FSV–K7)