General Instrument Setup
R&S
®
FSMR3000
314
User Manual 1179.0116.02 ─ 02
Remote command:
INSTrument:COUPle:USER<uc>:ELEMent:LIST?
Couple Selected Parameters ← Add New User Coupling
Closes the dialog box and adds the new user-defined coupling definition to the list.
10.6.3
How to Synchronize Parameters
Access
: [SETUP] > "Parameter Coupling"
User-defined couplings allow you to couple parameters other than those available in
the "General" tab of the coupling manager. Thus, you can create highly customized
couplings between measurement channels.
Compared to the predefined couplings, user couplings do not necessarily have to syn-
chronize all active measurement channels. Instead you can define specific channels
that are synchronized with each other, in any combination, while other channels remain
independent.
How to use predefined parameter couplings
1. Select the [SETUP] key.
2. Select "Parameter Coupling".
3. In the "General" tab, set the parameter you want to synchronize over all measure-
ment channels to "On".
4. Close the dialog box.
How to create user-defined parameter couplings
1. Select the [SETUP] key.
2. Select "Parameter Coupling".
3. Select the "User Coupling" tab.
4. Select "Add New User Coupling".
5. From the "Channel 1" list, select the channels or type of channel to couple.
6. From the "Coupling Element 1" list, select the parameter or marker to couple for
the selected measurement channels.
To shorten the list and restrict it to a certain type of parameters, select a "Category"
first.
7. For AM/FM/PM Analog Demod channels and frequency markers only, select the
individual windows (in the frequency domain) to couple.
8. To couple specific channels rather than all channels of a type:
a) Select the second channel for coupling from the "Channel 2" list
Synchronizing Measurement Channel Configuration
