Data Management
R&S
®
FSMR3000
250
User Manual 1179.0116.02 ─ 02
The selected settings are stored to the file
C:\R_S\INSTR\QuickSave\QuickSaveX.dfl
.
Note:
If you make any changes to the settings
after
storing the configuration file,
remember to save the settings again. Otherwise those settings cannot be restored
and will be overwritten by the stored values when the configuration file is recalled.
4. To restore the settings, select the "Open" icon from the toolbar.
5. Select the save set in which the settings were stored ("QuickSaveX").
The selected settings are restored to the instrument or channel.
To save configurable instrument settings
1. Select the "Save" icon from the toolbar.
2. In the "Save" dialog box, switch to the "Save" tab.
3. In the file selection dialog box, select a filename and storage location for the set-
tings file.
4. Optionally, define a comment to describe the stored settings.
5. Select whether the instrument settings for
all
"Channel"s are stored, or only those
for the
current
"Channel".
6. Select the items to be saved with the settings. Either the settings for the currently
selected "Channel" only, or the settings for all "Channel"s can be stored. Various
other items, such as lines or traces etc., can be stored as well (see
ter 9.3.2.1, "Stored Data Types"
7. Select "Save".
A file with the defined name and path and the extension
.dfl
is created.
If you make any changes to the settings
after
storing the configuration file, remember
to save the settings again. Otherwise those settings cannot be restored and will be
overwritten by the stored values when the configuration file is recalled.
To recall configurable instrument settings
1. Select the "Open" icon from the toolbar.
2. In the "Recall" dialog box, switch to the "Recall" tab.
3. In the file selection dialog box, select the filename and storage location of the set-
tings file.
Note:
The "File Type" indicates whether the file contains instrument settings for
all
"Channel"s, or only those for the current "Channel".
4. If several items were saved, select which items are restored.
Storing and Recalling Instrument Settings and Measurement Data
