Common Analysis and Display Functions
R&S
®
FSMR3000
235
User Manual 1179.0116.02 ─ 02
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
Remote command:
File Type ← Export Trace to ASCII File
Determines the format of the ASCII file to be imported or exported.
Depending on the external program in which the data file was created or is evaluated,
a comma-separated list (
CSV
) or a plain data format (
DAT
) file is required.
Remote command:
Decimal Separator ← Export Trace to ASCII File
Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.
Remote command:
File Explorer ← Export Trace to ASCII File
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
8.5.2
How to Export Trace Data and Numerical Results
The measured trace data and numerical measurement results in tables can be expor-
ted to an ASCII file. For each measurement point the measured trace position and
value are output.
The file is stored with a
.DAT
or
.CSV
extension. For details on the storage format see
Chapter 8.5.3, "Reference: ASCII File Export Format"
To export trace data and table results
1. Select [TRACE] > "Trace Config" > "Trace / Data Export" tab.
2. Select "Export all Traces and all Table Results" to export all available measurement
result data for the current application, or select a specific "Trace to Export".
3. Optionally, select the "Include Instrument & Measurement Settings" option to insert
additional information in the export file header.
4. Select the "Export Trace to ASCII File" button.
Importing and Exporting Measurement Results for Evaluation
