R&S FSMR3000, User Manual

Page: 16 / 733

Getting Started
R&S
®
FSMR3000
16 User Manual 1179.0116.02 ─ 02
4.2.6 Switching the Instrument On and Off
Table 4-1: Overview of power states
Status LED on Power key Position of main power switch
Off
gray
[0]
Standby
orange
[I]
Ready
green
[I]
To switch on the R&S FSMR3
The R&S FSMR3 is off but connected to power.
1. Set the switch on the power supply to position [I].
See Chapter 4.3.2.1, "AC Power Supply Connection and Main Power Switch" ,
on page 34.
The LED of the Power key is orange.
See
Chapter 4.3.1.1, "Power Key" , on page 26.
2. Press the Power key.
See Chapter 4.3.1.1, "Power Key" , on page 26.
The LED changes to green.
The R&S
FSMR3 boots.
After booting, the instrument is ready for operation.
To shut down the product
The product is in the ready state.
► Press the [Power] key.
The operating system shuts down. The LED changes to orange.
If the instrument temperature exceeds the limit specified in the data sheet, the
R&S
FSMR3 automatically shuts down to protect the instrument from damage.
To disconnect from power
The R&S FSMR3 is in the standby state.
1. NOTICE! Risk of data loss. If you disconnect the product from power when it is in
the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
See
Chapter 4.3.2.1, "AC Power Supply Connection and Main Power Switch" ,
on page 34.
The LED of the Power key is switched off.
2. Disconnect the R&S FSMR3 from the power source.
Preparing for Use