Spectrum Analyzer
R&S FS300
E-1007.9900.15
6-94
Operating manual, 02/2006
6.2.2.6
Setting the RF Input Attenuation Automatically
Use
The input attenuation should be set automatically to prevent the R&S FS300’s
input mixer from being overloaded. There are three RF input modes you can
choose from (coupling between reference level and input attenuation) to op-
timize measurements:
NORMAL
Normal setting for measurements.
LOW NOISE
Settings for measurements with low displayed average noise level of the
analyzer.
LOW DISTORTION
Setting for measurements with low inherent distortion of the analyzer.
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......
