Spectrum Analyzer
R&S FS300
E-1007.9900.15
6-84
Operating manual, 02/2006
6.2.1.4.3 ZOOM
Functions
Use
If you want to increase or decrease the size of the screen window to analyze
traces, you can zoom onto sections of the span or fill the whole screen with
the current screen window.
Reducing
the span
•
Press the
function key
in the
submenu.
The span is reduced by a factor of two. The center frequency remains
the same.
Increasing
the span
•
Press the
function key
in the
submenu.
The span is increased by a factor of two. The center frequency remains
the same. The center frequency will be adapted if the new display fre-
quency range exceeds the maximum permissible start or stop frequency.
Whole screen
1.
Press the
function key
in the
submenu.
The menu area, the function area and the parameter field are blanked
out on the screen [13]. The diagram area then fills the whole screen. The
scale lettering and all key parameters are displayed within the diagram
area.
2.
Press any key to return to the normal display mode.
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......
