R&S FS300
SYSTEM Functions (SYS Key)
Operating manual, 02/2006
6-151
E-1007.9900.15
6.3
SYSTEM Functions (SYS Key)
Introduction
The R&S FS300 has system and service functions as well as measurement
functions.
All current settings can be called so that they can be viewed at a glance, and
saved for use at a later date, a selftest can be run on the R&S FS300 and the
system settings configured. Furthermore, the R&S FS300 can be switched
over from remote control to local mode.
Switching over the
user interface
When the R&S FS300 has been switched on and the selftest has run without
detecting any faults, the spectrum analyzer’s user interface is activated.
1.
Press the
SYS
key
The measurement diagram and the parameter field are blanked out. The
menus for the system and service functions are brought up on the screen
in the menu area and the appropriate functions are assigned to the func-
tion keys [12]. Depending on the function key assignment, the associated
parameters are listed as tables in the diagram area.
2.
Press the
SYS key
The
new
settings are saved and the spectrum analyzer’s user interface
is activated again.
Press the
ESC/CANCEL key
The
old
settings are retained and the spectrum analyzer’s user interface
is activated again.
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......