R&S ESW-K58, User Manual

Page: 41 / 103

Analysis
R&S
®
ESW-K58
41 User Manual 1179.0880.02 ─ 03
Remote command:
CALCulate<n>:MARKer<m>:Y:PERCent
on page 92
6.3 APD display configuration
Access
●
"Marker Config" > "APD Display Configuration"
Multi APD Display
The Multi APD result display can either be configured to display a "Flat" 2-dimensional
power vs. frequency diagram or a "3D" 3-dimensional power vs. frequency vs. proba-
bility diagram.
Remote command:
CALCulate<n>:SGRam:THReedim[:STATe]
on page 92
CALCulate<n>:SPECtrogram:THReedim[:STATe]
on page 92
Show 3D Limits
The Show 3D limits switch enables and disables the limits on the 3D plot. If Tuned Fre-
quency is selected, only the limits on the Tuned Frequency are shown.
Remote command:
CALCulate<n>:SGRam:THReedim:LIMits
on page 93
CALCulate<n>:SPECtrogram:THReedim:LIMits
on page 93
Multi APD Color Mapping
Opens the dialog for color scheme settings. The dialog is similar to the "Color Mapping
Spectrogram" dialog in the R&S
ESW-B1 spectrum application. Refer to the
R&S ESW-B1 user manual for further information.
6.4 Scaling
Access
●
"Marker Config" > "Scaling"
Scaling