Operating the Instrument
R&S
®
ESW
60
Getting Started 1328.4922.02 ─ 06
Label
Information
"Step"
Currently selected scan type and frequency
step mode.
●
"LIN": Stepped scan with linear frequency
steps. The frequency step size is a fix
value in Hz.
●
"LOG": Stepped scan with logarithmic fre-
quency steps. The frequency step size is a
percentage of the current frequency.
●
"TD Scan": Time domain scan.
●
"Fixed Freq": Fixed frequency scan.
"Notch"
Current state of the notch filter.
"Out"
Currently selected output type.
If phones output is on, a corresponding icon is
displayed.
"LISN"
Currently selected LISN and LISN phase.
For R&S
ENV216, it also shows the state of
the highpass filter.
Only displayed when a LISN is included in the
measurement.
"SGL"
Indicates the progress of single measure-
ments.
The first number is the current measurement.
The second number is the total number of
measurements.
Only displayed for single measurements and if
the scan count is greater than 1.
"Frequency"
Current receiver frequency.
"75
Ω
"
75
Ω
input impedance has been selected.
"TRG"
Currently selected trigger source.
"TDF"
Currently selected transducers, including the
input they have been assigned to.
Ext. Gen
An external generator is being controlled by
the R&S
ESW (requires optional hardware).
Icons for individual settings
In the
receiver application
, a bullet next to the setting indicates that automatic
settings are used, not user-defined settings.
In
other applications
, a bullet next to the setting indicates that user-defined set-
tings are used, not automatic settings. A green bullet indicates that this setting is
Understanding the Display Information
