Remote Control
R&S
®
ESR
980
User Manual 1175.7068.02 ─ 12
Example:
DISP:PSAV:HOLD 30
Manual operation:
See
DISPlay:PSAVe[:STATe]
<State>
This command switches on or off the power-save mode of the display. With the power-
save mode activated the display including backlight is completely switched off after the
elapse of the response time (see
This mode is recommended to protect the display, especially if the instrument is oper-
ated exclusively via remote control.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
DISP:PSAVe ON
Switches on the power-save mode.
Manual operation:
See
DISPlay:SBAR[:STATe]
<State>
This command turns the status bar in the display on and off.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
DISP:SBAR OFF
Manual operation:
See
DISPlay:SKEYs[:STATe]
<State>
This command turns the softkey bar in the display on and off.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
DISP:SKEY OFF
DISPlay:TBAR[STATe]
<State>
This command turns the toolbar in the display on or off.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
DISP:TOOL ON
Display Configuration
