R&S ESR Series, User Manual

Page: 306 / 1126

Spectrum Measurements
R&S
®
ESR
303 User Manual 1175.7068.02 ─ 12
For more information see Chapter 5.2.5, "V-Networks Control (LISN)" , on page 173.
Remote command:
LISN type:
INPut:LISN[:TYPE]
on page 686
Phase:
INPut:LISN:PHASe
on page 686
Highpass filter:
INPut:LISN:FILTer:HPAS[:STATe]
on page 685
Peak Search
The reference section contains an overview of all functions that are part of the chapter
and lists the associated elements of the user interface.
Auto Peak Search
Turns the automatic marker peak search on and off.
For more information see "Performing a Peak Search" on page 299.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO
on page 781
Marker Configuration
To make the process of configuring markers as easy as possible, the R&S FSV-K54
features a "Marker Configuration" dialog box that contains all marker characteristics
necessary to perform successful EMI measurements.
The dialog box is made up out of two tabs. The first tab controls markers 1 to 8, the
second tab controls markers 9 to 16.
Measurements