R&S ENY-FTS
Safety Instructions
Operating Manual 1309.8949.14 - 0
2
6
1.1 Installation
Disconnect the ISN from the communication network, auxiliary equipment and other
devices before using the R&S ENY-FTS. Before performing the functional test, connect
the ISN with the ground plane.
Operate the equipment only in dry surroundings (indoor use). Allow any condensation
that occurs to evaporate before putting the instrument into operation. Do not exceed
the permissible ambient temperature, humidity or air pressure. The instrument is not
suitable for use in an explosive atmosphere.
Only approved accessory items, connectors, adapters, etc. are to be used to ensure
safe operation.
1.2 Applicable Safety Standards
Development and manufacture of the instrument complies with ISO 9001. The product
meets the requirements of the Low Voltage Directive (LVD) 2006/95/EC based on
IEC/EN 61010-1:2001.