Setting Up the Instrument
R&S
®
DVMS1
11
Getting Started 2113.7619.02 ─ 12
2.1.3
Checking the Accessories
The instrument comes with the following accessories:
●
Power cable
●
Getting started manual
2.1.4
Warranty Conditions
For information on warranty conditions for the R&S
DVMS, see the terms of the deliv-
ery documents.
2.2
Putting Up the Instrument
The instrument can be used in standalone operation or can be installed in a rack.
Risk of material damage
Make sure that the following conditions are met at the operation site:
●
The ambient temperature does not exceed the range specified in the data sheet.
●
All fan openings are unobstructed and the airflow perforations are unimpeded. The
minimum distance from the wall is at least 10
cm.
Failure to meet these conditions can damage the instrument or other devices in the
test setup.
If necessary, use proper protective equipment to protect DUTs against electrostatic dis-
charge in the event of human contact.
2.2.1
Placing the Instrument on a Bench Top
The R&S
DVMS is designed for use under general laboratory conditions.
Risk of injuries
If the instrument is not set up securely, you or others can be injured.
Place the instrument on a stable and level surface. Do not place anything on top of the
instrument, if the instrument is not in a level position.
Before folding out the feet at the instrument bottom, read the safety instructions for
instruments with fold-out feet at the beginning of this manual carefully.
Putting Up the Instrument
