LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
670
User Manual 1173.9628.02 ─ 16
READ:LTE:MEAS<i>:MEValuation:MODulation:CURRent?
READ:LTE:MEAS<i>:MEValuation:MODulation:AVERage?
READ:LTE:MEAS<i>:MEValuation:MODulation:SDEViation?
CALCulate:LTE:MEAS<i>:MEValuation:MODulation:CURRent?
CALCulate:LTE:MEAS<i>:MEValuation:MODulation:AVERage?
Return the current, average and standard deviation single value results.
The values described below are returned by
FETCh
and
READ
commands.
CALCulate
commands return limit check results instead, one value for each result listed below.
The ranges indicated below apply to all results except standard deviation results. The
minimum for standard deviation results equals 0. The maximum equals the width of the
indicated range divided by two. Exceptions are explicitly stated.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
<2_OutOfTol>
Out of tolerance result, i.e. percentage of measurement inter-
vals of the statistic count for modulation measurements exceed-
ing the specified modulation limits.
Range:
0 % to 100 %
Default unit: %
<3_EVM_RMSlow>
<4_EVM_RMShigh>
<5_EVMpeakLow>
<6_EVMpeakHigh>
Error vector magnitude RMS and peak values for low and high
EVM window position
Range:
0 % to 100 %
Default unit: %
<7_MErr_RMSlow>
<8_MErr_RMShigh>
Magnitude error RMS value for low and high EVM window posi-
tion
Range:
0 % to 100 %
Default unit: %
<9_MErrPeakLow>
<10_MErrPeakHigh>
Magnitude error peak value for low and high EVM window posi-
tion
Range:
-100 % to 100 % (AVERage: 0 % to 100 %, SDEVi-
ation: 0 % to 50 %)
Default unit: %
<11_PErr_RMSlow>
<12_PErr_RMSh>
Phase error RMS value for low and high EVM window position
Range:
0 deg to 180 deg
Default unit: deg
<13_PErrPeakLow>
<14_PErrPeakHigh>
Phase error peak value for low and high EVM window position
Range:
-180 deg to 180 deg (AVERage: 0 deg to 180 deg,
SDEViation: 0 deg to 90 deg)
Default unit: deg
Command Reference
深圳德标仪器
135-1095-0799
