R&S CMW-KM5 Series, User Manual

Page: 667 / 856

LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
667 User Manual 1173.9628.02 ─ 16
For each captured slot, three results are returned:
<Reliability>, {<ChannelType>, <OffsetRB>, <NoRB>}
slot 1
, ..., {<ChannelType>, <Off-
setRB>, <NoRB>}
slot n
n equals two times the number of captured subframes (see
CONFigure:
​
LTE:
​
MEAS<i>:
​
MEValuation:
​
MSUBframes
​
).
Return values:
<Reliability> Reliability Indicator
<ChannelType> PUSCh | PUCCh | NONE | DL | SSUB
Detected channel type for the first captured slot
PUSCh : slot contains only PUSCH
PUCCH : slot contains only PUCCH
NONE : slot contains no allocated RBs at all
DL : downlink slot (only relevant for TDD)
SSUB : part of special subframe (only relevant for TDD)
<OffsetRB> Offset of first allocated RB in the first captured slot
Range:
0 to 99
<NoRB> Number of allocated RBs in the first captured slot
Range:
0 to 100
Example: See Performing Single-Shot Measurements
Usage: Query only
Firmware/Software: V1.0.15.20
V2.0.20: DL and SSUB added to <ChannelType>
FETCh:LTE:MEAS<i>:MEValuation:TRACe:RBATable:SCC<no>?
READ:LTE:MEAS<i>:MEValuation:TRACe:RBATable:SCC<no>?
Returns the information of the SCC RB allocation table. See also chapter 3.2.6.8,
"Detailed Views: RB Allocation Table" , on page 528.
For each captured slot, three results are returned:
<Reliability>, {<ChannelType>, <OffsetRB>, <NoRB>}
slot 1
, ..., {<ChannelType>, <Off-
setRB>, <NoRB>}
slot n
n equals two times the number of captured subframes (see
CONFigure:
​
LTE:
​
MEAS<i>:
​
MEValuation:
​
MSUBframes
​
).
Suffix:
<no>
.
1
Only SCC1 supported - suffix can be omitted
Return values:
<Reliability> Reliability Indicator
Command Reference
深圳德标仪器
135-1095-0799