LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
623
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:RBALlocation
<Auto>, <NoRB>, <Offset>
Allows to define the resource block allocation manually for segment <no>. By default,
the RB allocation is detected automatically.
Suffix:
<no>
.
1..2000
Segment number
Parameters:
<Auto>
OFF | ON
OFF
: manual definition via <NoRB> and <Offset>
ON
: automatic detection of RB allocation
*RST:
ON
<NoRB>
Number of allocated resource blocks in each measured slot
Range:
see table below
*RST:
100
<Offset>
Offset of first allocated resource block from edge of allocated UL
transmission bandwidth
Range:
see table below
*RST:
0
Example:
See
Firmware/Software:
V3.0.10
Options:
R&S CMW-KM012
Channel Bandwidth
Range <NoRB>
Range <Offset>
1.4 MHz
1 to 6
0 to 5
3 MHz
1 to 15
0 to 14
5 MHz
1 to 25
0 to 24
10 MHz
1 to 50
0 to 49
15 MHz
1 to 75
0 to 74
20 MHz
1 to 100
0 to 99
CONFigure:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:MODulation
<ModStatistics>, <ModEnable>, <EVMenable>, <MagErrorEnable>,
<PhaseErrEnable>, <IBEenable>, <EqSpFlatEnable>, <ModScheme>
Defines settings for modulation measurements in list mode for segment <no>.
Suffix:
<no>
.
1..2000
Segment number
Command Reference
深圳德标仪器
135-1095-0799
