R&S CMW-KM5 Series User Manual Download Page 461

Page: 461 / 856

LTE Signaling

R&S

CMW-KM5xx/-KS5xx

461

User Manual 1173.9628.02 ─ 16

<3_NACK>

Received negative acknowledgments (percentage of sent
scheduled subframes)
Range:

0 % to 100 %

Default unit: %

<4_BLER>

Block error ratio (percentage of sent scheduled subframes for
which no ACK has been received)
Range:

0 % to 100 %

Default unit: %

<5_ThroughputAver> Average DL throughput (as percentage of maximum reachable

throughput)
Range:

0 % to 100 %

Default unit: %

<6_DTX>

Percentage of sent scheduled subframes for which neither ACK
nor NACK has been received
Range:

0 % to 100 %

Default unit: %

Example:

See

Performing a Continuous BLER Measurement

Usage:

Query only

Firmware/Software:

V2.0.10
V2.0.20: <6_DTX> added
V3.0.30: INTermediate command added
V3.2.50: SCC commands added

Options:

R&S CMW-KS502/-KS552 (FDD/TDD) for SCC

FETCh:INTermediate:LTE:SIGN<i>:EBLer:ALL:RELative?
FETCh:LTE:SIGN<i>:EBLer:ALL:RELative?

Return the relative overall results of the BLER measurement for the sum of all downlink
streams and carriers (PCC plus SCC).

The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.

Return values:

<1_Reliability>

see

Reliability Indicator

<2_ACK>

Received acknowledgments (percentage of sent scheduled sub-
frames)
Range:

0 % to 100 %

Default unit: %

<3_NACK>

Received negative acknowledgments (percentage of sent
scheduled subframes)
Range:

0 % to 100 %

Default unit: %

Command Reference

深圳德标仪器

135-1095-0799

Summary of Contents for CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMW-KM5 Series

Reviews:

Brands by name

Popular brands

R&S CMW-KM5 Series, User Manual

Search results

Summary of Contents for CMW-KM5 Series

Reviews:

Brands by name

Popular brands