manualshive.com logo in svg

R&S CMW-KM5 Series, User Manual

Share
Download
R&S CMW-KM5 Series User Manual Download Page 459

LTE Signaling

R&S

®

CMW-KM5xx/-KS5xx

459

User Manual 1173.9628.02 ─ 16

<2_ACK>

Number of received acknowledgments (sum of all downlink
streams)
Range: 

0  to  4E+9

<3_NACK>

Number of received negative acknowledgments (sum of all
downlink streams)
Range: 

0  to  4E+9

<4_Subframes>

Number of already processed subframes (per downlink stream)
Range: 

0  to  2E+9

<5_ThroughputAver>
<6_ThroughputMin>
<7_ThroughputMax>

Average, minimum and maximum throughput (sum of all down-
link streams)
Range: 

0 kbit/s  to  200E+3 kbit/s

Default unit: kbit/s

<8_DTX>

Number of sent scheduled subframes for which neither ACK nor
NACK has been received (sum of all downlink streams)
Range: 

0  to  4E+9

<9_Scheduled>

Number of already sent scheduled subframes (per downlink
stream)
Range: 

0  to  2E+9

<10_MedianCQI>

Median value of received CQI indices
Range: 

0  to  15

Example: 

See 

Performing a Continuous BLER Measurement

Usage: 

Query only

Firmware/Software: 

V2.0.10
V2.0.20: <8_DTX> and <9_Scheduled> added
V2.1.20: ranges extended
V3.0.10: <10_MedianCQI> added
V3.0.30: INTermediate command added, max number of sub-
frames enhanced for continuous measurements
V3.2.50: SCC commands added

Options: 

R&S CMW-KS502/-KS552 (FDD/TDD) for SCC

FETCh:INTermediate:LTE:SIGN<i>:EBLer:ALL:ABSolute?
FETCh:LTE:SIGN<i>:EBLer:ALL:ABSolute?

Return the absolute overall results of the BLER measurement for the sum of all down-
link streams and carriers (PCC plus SCC).

The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.

Return values: 

<1_Reliability>

see 

Reliability Indicator

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands