LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
313
User Manual 1173.9628.02 ─ 16
●
RFAO = virtual name for the RF OUT connectors
●
IQ2O | IQ4O | IQ6O | IQ8O = DIG IQ OUT 2 to 8, rear panel
Parameters:
<RXConnector>
RF1C | RF2C | RF3C | RF4C | RFAC | RFBC
RF connector for the input path
<RXConverter>
RX1 | RX2 | RX3 | RX4
RX module for the input path
<TX1Connector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the first output path
<TX1Converter>
TX1 | TX2 | TX3 | TX4
TX module for the first output path
<IQ1Connector>
IQ2O | IQ4O | IQ6O | IQ8O
DIG IQ OUT connector for external fading of the first output path
<TX2Connector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the second output path. Select different con-
nectors for the two paths.
<TX2Converter>
TX1 | TX2 | TX3 | TX4
TX module for the second output path. Select different modules
for the two paths.
<IQ2Connector>
IQ2O | IQ4O | IQ6O | IQ8O
DIG IQ OUT connector for external fading of the second output
path. Select different connectors for the two paths.
Example:
See
Firmware/Software:
V3.0.10
Options:
R&S CMW-KS510 and R&S CMW-KS520
Manual operation:
See
ROUTe:LTE:SIGN<i>:SCENario:TROFading:INTernal
<RXConnector>,
<RXConverter>, <TX1Connector>, <TX1Converter>, <TX2Connector>,
<TX2Converter>, <Fader>
Activates the scenario "1 Cell - Fading - 2 RF Out" with internal fading, using two RF
output (TX) paths and one RF input (RX) path. Selects the RF connectors, RX/TX
modules and the I/Q board to be used for fading.
To query the active scenario, use
.
Command Reference
深圳德标仪器
135-1095-0799
