LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
157
User Manual 1173.9628.02 ─ 16
Fig. 2-69: Time settings
Time Source
This parameter selects the date and time source.
●
CMW Time
Selects the current CMW (Windows) date and time as source. The Windows set-
tings determine the UTC date, the UTC time, the current daylight saving time offset
and the time zone offset.
●
Date / Time
Selects the parameters "Date / Time (UTC)" and "Daylight Saving Time" as source.
The time zone offset is set to 0.
Option R&S CMW-KS510 is required.
Remote command:
Date / Time (UTC)
Defines the UTC date and time to be used if "Time Source" is set to "Date / Time".
Option R&S CMW-KS510 is required.
Remote command:
Daylight Saving Time
Specifies a Daylight Saving Time (DST) offset to be used if "Time Source" is set to
"Date / Time".
You can disable DST or enable it with an offset of +1 hour or +2 hours.
Option R&S CMW-KS510 is required.
Remote command:
Send Time
Press "Now" to send the date and time information to the UE. This is only possible if an
RRC connection has been established.
"at Attach" selects whether the date and time information is sent to the UE during the
attach procedure or not.
Option R&S CMW-KS510 is required.
Remote command:
GUI Reference
135-1095-0799
