LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
102
User Manual 1173.9628.02 ─ 16
Example: The UE has the voice domain preference "IMS PS Voice only", but the cell
does not offer IMS services.
"Voice centric"
The UE leaves the cell to ensure the support of voice services. It dis-
ables the E-UTRAN capability and performs a reselection to GERAN
or UTRAN.
"Data centric"
The UE stays in the cell even if voice services are not possible.
Remote command:
Default Bearer
List of all established default bearers, one line per bearer.
Each line contains the following information:
●
Default bearer ID, composed as follows:
<EPS default bearer ID> (<APN>)
Example: "5 (cmw500.rohde.schwarz.com)" means default bearer 5, with access
point name "cmw500.rohde.schwarz.com"
●
IPv4 address assigned to the UE for this bearer
●
IPv6 prefix assigned to the UE for this bearer
Remote command:
Dedicated Bearer
List of all established dedicated bearers, one line per bearer.
Each line contains the following information:
●
Dedicated bearer ID, composed as follows:
<EPS dedicated bearer ID> (-> <EPS default bearer ID>, <profile>)
Example: "6 (->5, Voice)" means dedicated bearer 6, mapped to default bearer 5,
using dedicated bearer profile "Voice"
●
TFT port range assigned to the dedicated bearer
Remote command:
2.4.1.6
Settings
The main view provides the most important settings for fast access.
For carrier aggregation scenarios, the PCC and SCC settings are provided on separate
tabs.
GUI Reference
深圳德标仪器
135-1095-0799
