CDMA2000 Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
865
User Manual 1173.9511.02 ─ 11
<45_MSPowerNarrow>Results of the narrowband (1.23 MHz) power measurement.
Range:
-55 dBm to 42 dBm
Default unit: dBm
<46_OutOfTolCount> Out of tolerance result, i.e. percentage of measurement intervals
of the statistic count exceeding the specified limits.
Range:
0 % to 100 %
Default unit: %
<47_CurStatCount>} Number of evaluated valid slots in this segment.
Range:
0 to 1000
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V3.2.20
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
CALCulate:CDMA:MEAS<i>:MEValuation:LIST:OBW:CURRent?
FETCh:CDMA:MEAS<i>:MEValuation:LIST:OBW:CURRent?
Returns
CURrent
Occupied Bandwidth (OBW) results for all active segments in list
).
The values described below are returned by
FETCh
commands.
CALCulate
com-
mands return limit check results instead, one value for each result listed below.
The values listed below in curly brackets {} are returned for each active segment:
{...}
seg 1
, {...}
seg 2
, ..., {...}
seg n
. The number of active segments n is determined by
.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
. In list mode, a zero reliability indicator indi-
cates that the results in all measured segments are valid. A non-
zero value indicates that an error occurred in at least one of the
measured segments.
{<2_SegReliability>
0 | 3 | 4 | 8
The segment reliability indicates whether one of the following
exceptions occurred in this segment:
0:
No error
3:
Signal overflow
4:
Signal low
8:
Synchronization error
If a combination of exceptions occurs, the most severe error is
indicated.
Command Reference
深圳德标仪器
