1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
413
User Manual 1173.9511.02 ─ 11
<3_W24IData>,
<4_W24QData>,
<5_W12IData>,
<6_W24QData>}
W
2
4
- I Data channel,
W
2
4
- Q Data channel,
W
1
2
- I Data channel,
W
1
2
- Q Data channel
Range:
-60 dB to +10 dB
Default unit: dB
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.20
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:OBW:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW:CURRent?
Returns Occupied Bandwidth (OBW) results in list mode.
To define the calculation and enable the calculation of the results use the command
.
The values listed below in curly brackets {} are returned for each active segment:
{...}
seg 1
, {...}
seg 2
, ..., {...}
seg n
. The number of active segments n is determined by
.
The values described below are returned by
FETCh
and
READ
commands.
CALCulate
commands return limit check results instead, one value for each result listed below.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
The values described below are returned by the
FETCh
command. The
CALCulate
command returns limit check results instead, one value for each result listed below.
For details refer to
chapter 3.2.8, "Multi Evaluation Measurement Results"
Return values:
<1_Reliability>
Conventions and General Information
. In list mode, a zero relia-
bility indicator indicates that the results in all measured seg-
ments are valid. A non-zero value indicates that an error occur-
red in at least one of the measured segments.
Command Reference
深圳德标仪器
135-1095-0799