manualshive.com logo in svg

R&S CMW-KG4 Series, User Manual, Page: 316 / 988

Share
Download
R&S CMW-KG4 Series User Manual Download Page 316

WCDMA Signaling

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

316

User Manual 1173.9657.02 ─ 11

<DPCCHDTX>

NO | YES
Support of discontinuous uplink DPCCH transmission

<SlotFormat4>

NO | YES
Support of DPCCH slot format 4

<CommonEDCH>

NO | YES
Support of common E-DCH

<EDPCCHPwrBoost> NO | YES

Support of E-DPCCH power boosting

Example: 

See 

Retrieving Information Provided by the UE (Signaling)

Usage: 

Query only

Firmware/Software: 

V1.0.15.20
V3.2.10: added <DPCCHDTX>, <SlotFormat4>, <Commo-
nEDCH> and <EDPCCHPwrBoost>

Manual operation:

See 

"PHY Uplink"

 

on page 124

SENSe:WCDMa:SIGN<i>:UECapability:MMODe?

Returns UE capability information indicating whether the UE supports UTRA FDD or
TDD or both.

Return values: 

<UTRA>

FDD | TDD | BOTH

Example: 

See 

Retrieving Information Provided by the UE (Signaling)

Usage: 

Query only

Firmware/Software: 

V1.0.15.20

Manual operation:

See 

"Multi Mode / RAT"

 

on page 125

SENSe:WCDMa:SIGN<i>:UECapability:MRAT?

Returns UE capability information indicating the Radio Access Technologies (RAT) that
the UE supports.

Return values: 

<SupportGSM>

NO | YES
Indicates whether the UE supports GSM

<MultiCarrier>

NO | YES
Indicates whether the UE supports multi carrier mode

<UTRANGERAN>

NO | YES
Indicates whether the UE supports UTRAN to GERAN NACC

<HandoverGAN>

NO | YES
Indicates whether the UE supports CS handover to GAN

Command Reference

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments