WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
204
User Manual 1173.9657.02 ─ 11
See also 3GPP TS 25.214, section 6A.
Option R&S CMW-KS401 required.
Remote command:
UE Category
In signaling mode the UE category to be used by the R&S
CMW can be set manually
or it can be set automatically according to the UE categories reported by the UE in the
capability report. In reduced signaling mode the category must be set manually.
●
Manually set value:
If you set the category manually and use a fixed reference channel, the configured
category and the selected H-set must be compatible. For mapping tables refer to
3GPP TS 34.121, section 9 or see
"H-set selection for fixed reference channels"
on page 48.
Consider that the dual carrier operation requires UE category from 21 onwards.
See also
●
"Use Reported (if available)":
If no reported value is available, the manually configured value is used.
If reported values are available, the application displays the used value.
Note that the terms "UE Category" and "HS-DSCH Category" are synonymous in the
context of HSDPA.
Option R&S CMW-KS401 required.
Remote command:
Configuration Type
Selects the configuration type of the High Speed Downlink Shared Channel (HS-
DSCH). The HS-DSCH is the downlink transport channel for user data.
Option R&S CMW-KS401 required.
●
Fixed Reference Channel
: FRC according to 3GPP TS 25.101, Annex A7. Many
performance tests for HSDPA use a specific FRC.
For configuration see
chapter 2.4.13.2, "Fixed Reference Channel Configuration"
●
CQI
: Channel for CQI reporting tests.
For configuration see
chapter 2.4.13.3, "CQI Test Channel Configuration"
●
User Defined
: Flexible configuration of transport channel parameters by the user.
For configuration see
chapter 2.4.13.4, "User Defined Channel Configuration"
Remote command:
GUI Reference
深圳德标仪器