WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
176
User Manual 1173.9657.02 ─ 11
2.4.10.5
TX Power Control - TPC Setup
The following TPC setups are available.
TPC Setup
This table lists all defined TPC pattern configurations. One of these configurations is
active (see
on page 173). Most settings are predefined and cannot
be modified (are grayed out).
For the setup "Max. Power E-DCH" two lines are displayed. The first one applies to
test mode RMC+HSPA (subtest 1 to 4), the second line to test mode HSPA (subtest 5).
Table columns:
●
"PreCond."
defines or displays a precondition that the UE is commanded to before
the pattern can be executed. For test steps E, F, G and H segmentation can be
enabled.
●
"Configuration"
defines or displays the TPC pattern.
●
"Alg./Step"
displays the power control algorithm and the TPC step size if they are
fixed for the TPC pattern.
●
"Trigger"
displays the trigger event for generation of a trigger pulse that can be
evaluated by a measurement application of the R&S
CMW.
For background information refer to:
●
chapter 2.2.14.1, "TPC Pattern Setups"
●
chapter 2.2.14.10, "Preconditions and Pattern Execution"
GUI Reference
深圳德标仪器
135-1095-0799