R&S CMW-KG4 Series, User Manual

Page: 133 / 988

WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
133 User Manual 1173.9657.02 ─ 11
2.4.1.6 Settings
The main view provides only the most important settings for fast access while the con-
figuration dialog provides all settings.
Exception: Parameter "Reduced Signaling" is not available in the configuration dialog.
Fig. 2-47: Settings in the main view
Cell Setup
If the dual carrier scenario is active, most settings can be configured per carrier. The
cell setup area shows settings of the currently selected carrier and common settings.
If the dual carrier scenario is inactive, the carrier selection field is hidden.
The area contains the following settings:
●
Most important RF settings (downlink per carrier)
See
chapter 2.4.7.1, "Signal Routing" , on page 143
●
Scrambling codes (downlink per carrier)
See
"Primary Scrambling Code" on page 189
and "Uplink Scrambling Code" on page 169
●
Downlink physical channel settings (per carrier, select a channel to access its set-
tings)
See
chapter 2.4.9, "Physical Channel DL Settings" , on page 154
●
PS Domain (common setting)
See
"Packet Switched Domain" on page 189
●
Reduced Signaling (common setting)
GUI Reference
深圳德标仪器
135-1095-0799