Network operation and remote control
R&S
®
AREG800A
183
User Manual 1179.3615.02 ─ 01
Example:
GPIB::28::INSTR
28 is the selected GPIB bus channel
10.2.4
LXI browser interface
The LXI browser interface allows easy configuration of the LAN and remote control of
the R&S
AREG800A without additional installation requirements. The instrument's LXI
browser interface works correctly with all W3C compliant browsers.
See
Chapter 10.11.1, "LXI functionality"
on page 241 for more about LXI.
The LAN settings are configured using the instrument's LXI browser interface descri-
bed in
Chapter 10.6.2.1, "LAN configuration"
on page 208. The LXI status settings in
the R&S
AREG800A are described in
Chapter 10.6.1, "LXI status settings"
10.3
Remote control programs and libraries
This section shows how the remote-control programs access the instrument, and the
libraries they require for the corresponding interface protocols.
Figure 10-2: Overview of remote control interfaces, protocols and libraries
Possible setups and access functions
The following examples give an overview of dependencies between the available libra-
ries, the possible interfaces and protocols, and whether an instrument driver is provi-
ded. For detailed information, see the application note
Rohde&Schwarz Signal Generators
Remote control programs and libraries
