Remote control commands
R&S
®
NRPxxS(N)
69
User Manual 1177.5079.02 ─ 15
Setting parameters:
<number>
Range:
0 to 9
*RST:
0
Usage:
Setting only
*SRE
<register>
Service request enable
Sets the service request enable register to the specified value. This command deter-
mines under which conditions a service request is triggered.
Parameters:
<register>
Range:
0 to 255
*RST:
0
*STB?
Status byte
Returns the contents of the status byte in decimal form.
Usage:
Query only
*TRG
Trigger
Triggers a measurement if the following conditions are met:
●
Power sensor is in the waiting for trigger state.
●
Trigger source is set to
BUS
.
See
BUS
.
Usage:
Event
*TST?
Selftest
Triggers a selftest of the R&S NRPxxS(N) and outputs the result.
0
indicates that no
errors have occurred.
Usage:
Query only
*WAI
Wait to continue
Prevents the execution of the subsequent commands until all preceding commands
have been executed and all signals have settled.
Common commands