GUI reference
R&S
®
ZNA
422
User Manual 1178.6462.02 ─ 20
5.5.11.1
Import Complex Data dialog
The "Import Complex Data" dialog loads a memory trace from a trace file. Trace files
are ASCII files with selectable file format. The loaded trace data is used to generate a
memory trace which is coupled to the active data trace.
Access:
Trace – [Trace
Config] > "Trace Data" > "Import..."
Background information
Refer to
On loading data from a trace file with several traces, the analyzer displays a dialog to
select one or more of the traces stored in the file (see
Chapter 5.5.11.3, "Select Param-
on page 427). E.g., for an
*.s2p
Touchstone file, the box offers all four 2-
Chapter 4.4.2.1, "Touchstone files"
Coupling between the imported memory trace and the active data trace implies that the
stimulus values of the imported data and of the active trace must be compatible. Com-
patibility means that the "Sweep Type" of the two traces must match; the position and
number of the sweep points do not have to be the same.
The analyzer checks for compatibility before importing data. The "Select Parameter"
box remains empty if the selected file contains no compatible data.
"Import Complex Data" is a standard "Open File" dialog with an additional button.
Import Data to New Mem
Specifies whether the loaded data overwrite an existing memory trace, if available (box
unchecked), or whether they are used to generate a new memory trace (box checked).
If the box is unchecked and the active trace is a memory trace, then this memory trace
will be overwritten. If the box is unchecked and the active trace is a data trace, then the
data trace's last created memory trace will be overwritten (or a new memory trace will
be created, in case there was previously no memory trace assigned to this data trace).
Remote command:
Traces softtool
