GUI reference
R&S
®
ZNA
416
User Manual 1178.6462.02 ─ 20
Access:
●
Trace – [Trace
Config] > "Trace Statistics" > "Evaluation Range..."
●
Channel – [Offset
Embed] > "Offset" > "Evaluation Range..."
●
...
Evaluation Range
Selects a predefined evaluation range. Up to 10 different ranges are available for each
recall set. "Full Span" means that the search range is equal to the entire sweep range.
The trace statistics functions consider all measurement points with stimulus values x
i
between the "Start" and "Stop" value of the evaluation range:
"Start"
≦
x
i
≦
"Stop"
The evaluation ranges are defined similar to the marker search ranges. For more infor-
mation, see
Chapter 5.7.3.2, "Search Range dialog"
Note:
A restricted evaluation range is indicated in the "Trace Statistics" info field.
Remote command:
Range Limit Lines On
Displays or hides the range limit lines in the diagram area. Range limit lines are two
vertical lines at the Start and Stop values of the active evaluation range ("Range 1" to
"Range 10").
Remote command:
CALCulate<Chn>:STATistics:DOMain:USER:SHOW
5.5.9
Smooth Shift Hold tab
Provides various functions to modify the entire measured trace.
Traces softtool
