R&S 1332.4500K22, User Manual

Page: 388 / 1709

GUI reference
R&S
®
ZNA
388 User Manual 1178.6462.02 ─ 20
The new trace is created with the settings of the former active trace, but displayed in
another color. The former and the new active trace overlay each other. Change the ref-
erence position or select a different measurement for the new trace to separate them
(see
Chapter 5.2, "Meas softtool" , on page 300).
The new trace is named "Trc<n>", where <n> is the largest of all existing trace num-
bers plus one. The name can be changed in the
Trace Manager dialog .
Remote command:
CALCulate<Ch>:PARameter:SDEFine
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:FEED
Add Trace + Diagram
Creates a trace in the active channel and assigns it to a new diagram. Otherwise
behaves like
Add Trace .
Remote command:
CALCulate<Ch>:PARameter:SDEFine
DISPlay[:WINDow<Wnd>][:STATe]
ON
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:FEED
Delete Trace
Deletes the active trace and removes it from the diagram area. If the active diagram
contains only one trace, the diagram is also deleted.
"Delete Trace" is disabled if the active recall set contains only one trace. In manual
control, each recall set must contain at least one diagram area with one channel and
one trace.
Tips:
●
You can also hide traces without actually deleting them: remove the corresponding
"On" flags in the "Trace Manager" (see
Chapter 5.5.1.3, "Trace Manager dialog" ,
on page 390).
●
Use the undo function to restore a trace that was unintentionally deleted.
Remote command:
CALCulate<Ch>:PARameter:DELete
CALCulate:PARameter:DELete:ALL
CALCulate<Ch>:PARameter:DELete:CALL
Diagram / Channel
Displays the active diagram and channel, i.e. the diagram and channel of the Active
Trace . Allows you to move the active trace to another diagram or channel.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:FEED
Show <Trace Name> / Hide All Other Traces / Show All Traces
Configures the visibility of the traces in the active diagram:
●
"Show <Trace Name>" toggles the visibility of the Active Trace
●
"Hide All Other Traces" hides all traces of the active diagram – except the active
one (which can be visible or not)
●
"Show All Traces" makes all traces of the active diagram visible
Note:
Traces softtool