Remote Control
R&S
®
FSPN
500
User Manual 1179.4363.02 ─ 01
SYSTem:COMMunicate:REST:ENABle
<RestState>
This command returns information about the HUMS REST status and enables or disa-
bles the public HUMS REST endpoints.
Parameters:
<RestState>
ON | OFF | 0 | 1
Example:
//Return REST state
SYST:COMM:REST:ENAB?
SYSTem:COMMunicate:SNMP:COMMunity:RO
<CommunityString>
This command sets the SNMP community string for read-only access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
Setting parameters:
<CommunityString> String containing the community name.
Example:
//Set community name
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RO 'ABC'
Usage:
Setting only
SYSTem:COMMunicate:SNMP:COMMunity:RW
<CommunityString>
This command sets the SNMP community string for read-write access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
Setting parameters:
<CommunityString> String containing the community name.
Example:
//Set read-write access
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RW 'ABC'
Usage:
Setting only
SYSTem:COMMunicate:SNMP:CONTact
<SnmpSysContact>
This command sets the SNMP contact information for the administrator.
Not setting the contact information via SCPI persistently allows to change the string via
SNMP.
Configuring the R&S
FSPN
