R&S 1129.7246.03, Operating Manual

Page: 97 / 855

R&S ESU Instrument Functions
Receiver Mode
4.66 Operating Manual 1302.6163.12 - 03
SELECT
MARKER
The SELECT MARKER softkey activates the numerical selection of the marker in
the data entry field. If no marker is active when MKR-> menu is called, MARKER 1 is
automatically switched on. Delta marker 1 is selected by input of ' 0 '.
Remote command:
CALC:MARK1 ON;
CALC:MARK1:X <value>;
CALC:MARK1:Y?
PEAK
The PEAK softkey sets the active marker or delta marker to the peak of the trace.
If no marker is active when MKR-> menu is called, MARKER 1 is automatically
switched on and the peak search is performed.
Remote command:
CALC:MARK:MAX
CALC:DELT:MAX
NEXT PEAK
The NEXT PEAK softkey sets the active marker/delta marker to the next lower peak
value on the trace. The search direction is defined in the NEXT MODE submenu
(see analyzer mode).
Remote command:
CALC:MARK:MAX:NEXT
CALC:DELT:MAX:NEXT
NEXT PEAK
RIGHT
The NEXT PEAK RIGHT softkey sets the active marker/delta marker to the next
lower peak value to the right side of the current marker position on the selected
trace.
Remote command:
CALC:MARK:MAX:RIGH
CALC:DELT:MAX:RIGH
NEXT PEAK
LEFT
The NEXT PEAK LEFT softkey sets the active marker/delta marker to the next lower
peak value to the left side of the current marker position on the trace.
Remote command:
CALC:MARK:MAX:LEFT
CALC:DELT:MAX:LEFT
MIN
NEXT MIN
NEXT MIN RIGHT
NEXT MIN LEFT
SETTINGS
COUPLED
SEARCH LIMITS
!
LEFT LIMIT RIGHT
LIMIT
THRESHOLD
SEARCH LIMIT OFF
PEAK EXCURSION