R&S 1129.7246.03, Operating Manual

Page: 554 / 855

Operating Manual 1302.6163.12 - 03 6.115
R&S ESU Remote Control – Description of Commands
HCOPy Subsystem
6.10 HCOPy Subsystem
The HCOPy subsystem controls the output of display information for documentation purposes on output
devices or files. The instrument allows two independent printer configurations which can be set sepa-
rately with the numeric suffix <1|2>.
HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
"HCOP:ABOR"
Characteristics: *RST value: -
SCPI: conform
Mode: R, A
This command is an event and therefore has no *RST value and no query.
HCOPy:CMAP<1...34>:DEFault<1|2|3>
This command resets the colors for a hardcopy to the selected default settings. DEFault1(SCREEN
COLORS, but background white), DEFault2 (OPTIMIZED COLOR SET) and DEFault3 (USER
DEFINED). The numeric suffix in CMAP is not significant.
Example:
"HCOP:CMAP:DEF2"
'selects OPTIMIZED COLOR SET for the color settings of a hardcopy.
Characteristics: *RST value: --
SCPI: conform
Mode: R, A
This command is an event and therefore has no query and no *RST value.
HCOPY:CMAP<1...34>:HSL <hue>,<sat>,<lum>
This command defines the color table in USER DEFINED COLORS mode.
To each numeric suffix of CMAP is assigned one or several picture elements which can be modified
by varying the corresponding color setting. The following assignment applies:
CMAP1 Background
CMAP2 Grid
CMAP3 Function field + status field + data entry text
CMAP4 Function field LED on
CMAP5 Function field LED warn
CMAP6 Enhancement label text
CMAP7 Status field background
CMAP8 Trace 1
CMAP9 Trace 2
CMAP10 Trace 3
CMAP11 Marker
CMAP12 Lines
CMAP13 Measurement limit check pass
CMAP14 Limit check fail