OverDryve
™
Pro II User Manual
5
2. Getting Started
Setup
Connect to the Internet
Enable the Wi-Fi hotspot on your smartphone or other in-vehicle device
and then connect OverDryve
™
Pro II or connect to your home Wi-Fi to
complete setup.
Register your device
Register with Rand McNally for updates and support.
Connect to Bluetooth
Enable Bluetooth on your smartphone and pair OverDryve
™
Pro II to enable
hands-free calling and texting, music streaming, and voice assistance.
Connect to your truck stereo system
You can listen to audio through any of the following four methods:
1. Plug an AUX cable into the Smart Mount and the AUX port in
your truck.
Note:
Do not plug the AUX cable into the audio out port on
OverDryve
™
Pro II.
2. Use the Smart Mount speaker.
3. Use the FM Transmitter. To use the FM transmitter, attach the antenna
to the Smart Mount. On OverDryve
™
Pro II, tap
Entertainment >
FM Transmitter
and follow the instructions.
4. Add an AUX input to your existing truck.
Note:
If your device has not been able to detect your location, you may be
asked to set your time zone.
Summary of Contents for OverDryve Pro II
Page 1: ...USER MANUAL ...