31
EMC INFORMATION
GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
The vacuum unit is intended for use in the electromagnetic environment specified below. The customer or the user of the vacuum should assure
that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment - Guidance
RF Emissions CISPR 11
Group 1
The vacuum uses RF energy only for its internal function; therefore, its RF emissions are very low
and are not likely to cause any interference in nearby electronic equipment.
RF Emissions CISPR 11
Class A
The vacuum is suitable for use in all establishments, other than domestic establishments and
those directly connected to the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Not Applicable
Voltage Fluctuations/
Flicker Emissions IEC
61000-3-3
Not Applicable
Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to
the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect medical electrical equipment.
The use of accessories, transducers, and cables other than those specified, with the exception of tranducers and cables sold by
the manufacturer of this device as replacement parts for internal components, may result in increased emissions or decreased
immunity of the Ramvac Badger LF.
The Ramvac Badger LF should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the Ramvac Badger LF should be observed to verify normal operation in the configuration in which it will be used.
